RAL colours in ARRIBA® CA3D (formerly RIBCON)

The CAD and visualization tool RIBCON is an easy to use solution: You have access to the RAL DESIGN System, RAL CLASSIC and RAL EFFECT in 2D (surfaces) and 3D (objects) and you can switch between the versions. Colour windows offer an accurate and easy to use control.

Colour identity as early as the draft phase, the later version by the craftsmen will be identical.

 

Versions	RIBCON 13.x and up
File format	col
Colours	RAL CLASSIC: 210 RAL DESIGN System: 1625 RAL EFFECT: 490
Optimizations	Standard RGB Trinitron RGB Offset printing uncoated paper Offset printing coated paper Newsprint
Application for	2D und 3D
Ergonomics	***

 

Destination Directory

RIBCON 13	{Datenverzeichnis}\STANDARD
RIBCON 14	{Datenverzeichnis}\STANDARD
RIBCON 15	{Datenverzeichnis}\_STANDARD
ARRIBA CA3D	{Datenverzeichnis}\_STANDARD

Important: In version 13 you have to rename the RAL colour file to “DIA_COL.COL”.
The adherence to this destination path is necessary for the availability of the palettes in the program.

In this program variant the CMYK palettes (artprint, offset printing uncoated and coated paper) were defined in RGB. To achieve this the black component was substituted by respective negative RGB values (standard formula).

Making a RAL colour palette available in RIBCON/ARRIBA CA3D

To be able to use the RAL colours in RIBCON Version 13, replace the existing file DIA_COL.COL with the RAL colour palette file. In other words, re-name the existing file DIA_COL.COL (e.g. to DIA_COL.ALT) so that you can use it again, and put one of the files mentioned above in its place, which you rename as DIA_COL.COL. In this way you can also replace the DIA_COL.COL file as often as you wish for various output optimizations.

In version 14 and 15, the replacemant process is made automatically:

1. Input the keyboard command "ral".
2. Choose the path selection "standard".
3. Select the desired RAL colour palette file.
4. Close and re-start RIBCON. (No restart needed in ARRIBA®CA3D)

The program copies the RAL palette under the name DIA_COL.COL into the project directory. an existing DIA_COL.COL file will be overwritten.

Using RAL colours in RIBCON

After the installation, the RAL colours are available in the desired output-optimised form for all colour functions (lines, filling-in, renderings etc.) in the colour window of the current project (when installed in the project directory) or generally in RIBCON (when installed in the standard directory):

1. Open a new or existing project in RIBCON.
2. Draw any object and select it (e.g. a simple rectangle).
3. Allocate the desired RAL colour to the object.
   
   

The colour selction window shows the RAL colours and the optimized output device of the active palette.

 

---